Buckster

People naturally stay about 500 feet away from Yen due to the stench from his underkaks.

Did she say anything about you looking like a peadophile?

Good to see an example, did you post that for Ren? Let's face it, he has never seen the inside of a dentists office.

He does, it's a well known fact.

You requested it is the ass again?

Well I fitted the electrical connectors and fired up the halo on the new headlight, I also modified the mount so the existing headlight rim fits better. These were the spade connectors on the headlight and the bike. These are the new connectors. Here is how it looks.

Two Kymco’s together.

I’ll slap a random greasy spic today to redress the balance, there are a few in Edinburgh.

Plans for today are to do stuff on my rear mudguard and fit the extra electrical connectors to my new headlight.

Did you go somewhere? I didn’t notice.

That is only if using an led bulb in a halogen headlamp, a purpose made led headlamp unit is fine.

Not possible since he was abducted by aliens.

You seem much the same as normal and I use the word “normal” very loosely.

Lone has departed.

Lamb Land, sounds like a Welsh peado fantasy.

The Welsh perked their ears up at that.

What we really need is loads of people who take themselves seriously.

Two intact legs.

I forgot to add gimps to the list.

Another Chinese bike owner.

There are screws on the inside that go into the bottom yoke so you have to drop the fork leg out to replace them.

Uh oh, two of them on the thread now, one more at it will be like a scene from the Scottish play.

It’s just the dust cover, it does not contact with the fork and I have not got around to replacing it.

Lockdown is a conspiracy to make me buy stuff for the bike. I thought this would be a bigger job but in reality only took 30 minutes. the standard headlight looked like this. First job was to remove this and the backing cup. to get to this point, on some earlier models there is a section back there that needs cutting out, however this is not the case with mine. Then it was a simple job to bolt in the mounting basket for the new headlight. Then pop the new headlight in with the retaining ring. I did not connect the halo ring as I was not happy to use the existing spade connectors, I have some Molex waterproof two pin connectors which I will put on in a few days once I dig them out. I then fitted the existing bezel but it really needs a deeper one so I will be ordering that. I still need to adjust the aim but for now it looks good. Low beam. High beam.