skyrider Posted January 15, 2023 Share Posted January 15, 2023 On 15/01/2023 at 13:44, Slowlycatchymonkey said: Its been pissing down everyday since the beginning of December. Don’t want to jinx it but have you had a look at next week? Looks like theres a wee chance of a dry day Expand we might get ice and snow 1 Link to comment Share on other sites More sharing options...
Clive Posted January 15, 2023 Share Posted January 15, 2023 On 15/01/2023 at 17:03, skyrider said: we might get ice and snow Expand Snow warning for us tomorrow. 3 1 Link to comment Share on other sites More sharing options...
Clive Posted January 15, 2023 Share Posted January 15, 2023 On 15/01/2023 at 17:09, Clive said: Snow warning for us tomorrow. Expand BBC has changed its minds now.....says sunny and 2c all day..... 2 Link to comment Share on other sites More sharing options...
Slowlycatchymonkey Posted January 15, 2023 Share Posted January 15, 2023 On 15/01/2023 at 17:18, Clive said: BBC has changed its minds now.....says sunny and 2c all day..... Expand Brrr 3 Link to comment Share on other sites More sharing options...
Clive Posted January 15, 2023 Share Posted January 15, 2023 On 15/01/2023 at 17:34, Slowlycatchymonkey said: Brrr Expand Think we will be running our gas bill up tomorrow. 2 1 Link to comment Share on other sites More sharing options...
Sir Fallsalot Posted January 15, 2023 Share Posted January 15, 2023 On 15/01/2023 at 00:53, Pedro said: Where is my gif? I love it! Expand Its my favorite laughing gif, i created it on giphy, i think you will have to copy and paste it to your PC and then copy and paste it when you want it unless Pete can do something with it here 3 Link to comment Share on other sites More sharing options...
XTreme Posted January 15, 2023 Author Share Posted January 15, 2023 On 15/01/2023 at 17:40, Sir Fallsalot said: Its my favorite laughing gif, i created it on giphy, i think you will have to copy and paste it to your PC and then copy and paste it when you want it unless Pete can do something with it here Expand No......there are no gifs in the system, they're all streamed from giphy. 2 Link to comment Share on other sites More sharing options...
Clive Posted January 16, 2023 Share Posted January 16, 2023 Bugger!......its snowing. 2 Link to comment Share on other sites More sharing options...
XTreme Posted January 16, 2023 Author Share Posted January 16, 2023 On 16/01/2023 at 00:17, Clive said: Bugger!......its snowing. Expand Not going above 7 here today! 2 1 Link to comment Share on other sites More sharing options...
DesmoDog Posted January 16, 2023 Share Posted January 16, 2023 On 15/01/2023 at 09:41, Catteeclan said: Hmm, Vids please. Expand I do have a camera on it, but it's only to monitor what's going on. I have pretty much given up on doing timelapses since I never did anything with them anyway. That said here are a couple I did when it was set up to do it automatically - obviously I didn't optimize anything to make them look good. There are a ton of choices to make it look different, you can freeze the extruder so it looks like it's just moving straight up, or move it off to the side entirely, or let it move around, or a bunch of other crap. Some of them have an effect on the quality of the print so my default is now "off". Also the webcam I use sucks (doesn't handle anything less than ideal lighting very well, doesn't auto focus, etc) and the position of the camera isn't great for this sort of thing. I guess the second one is recent, I updated some software and reset some defaults, but it's been turned off again already. http://teamyikes.com/Hardtail/06_Phil_A_Ment_20210115052430.mp4 http://teamyikes.com/Hardtail/Tail Light Housing v4.aw_20230107011406.mp4 Anywhos... last week I was working on tail lights. The light I wanted to use was made for a larger fender, it didn't fit the radii of the smaller fender very well so I printed an adapter to make it fit. I thought I liked it but every time I left it a while and came back I decided I didn't like it after all and tried to change it. I've printed so many of them in so many materials and designs it's embarrassing. I finally accepted it wasn't going to work and I may as well do the entire light. It will require sanding and painting but should work. I started out thinking I'd use an incandescent bulb because an LED would look out of place on the bike it's going on, then decided to use an LED panel I had for another light/bike. With an LED I can go smaller and won't have to deal with heat. Here's a family shot of the changes that were made long the way. I forgot, this place doesn't let me hotlink photos from my website cuz it's not https... so the first pic is the family of tail lights. Second is the stl file (digital model basically) for the "final" version. Last pic is the earliest version sitting on the fender. This week's project is a chain guard. It's too long to fit the printer bed so it needs to be done in pieces. I'm on the third iteration now and as per usual, as soon as I start printing it I think of something I want to change. It's now 3;20 am here and the shim I printed to mimic the latest change I want to make just finished printing so the last piece that took two hours to print isn't for naught... no pictures of any of that stuff. It's still ugly. It will be a while before that one's done, each change so far has involved starting over from the beginning, not minor tweaks. 7 1 Link to comment Share on other sites More sharing options...
Buckster Posted January 16, 2023 Share Posted January 16, 2023 Someone has dropped a massive bag of cocaine outside and it is cold as well. 1 2 Link to comment Share on other sites More sharing options...
Slowlycatchymonkey Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 08:32, DesmoDog said: I do have a camera on it, but it's only to monitor what's going on. I have pretty much given up on doing timelapses since I never did anything with them anyway. That said here are a couple I did when it was set up to do it automatically - obviously I didn't optimize anything to make them look good. There are a ton of choices to make it look different, you can freeze the extruder so it looks like it's just moving straight up, or move it off to the side entirely, or let it move around, or a bunch of other crap. Some of them have an effect on the quality of the print so my default is now "off". Also the webcam I use sucks (doesn't handle anything less than ideal lighting very well, doesn't auto focus, etc) and the position of the camera isn't great this sort of thing. I guess the second one is recent, I updated some software and reset some defaults, but it's been turned off again already. http://teamyikes.com/Hardtail/06_Phil_A_Ment_20210115052430.mp4 http://teamyikes.com/Hardtail/Tail Light Housing v4.aw_20230107011406.mp4 Anywhos... last week I was working on tail lights. The light I wanted to use was made for a larger fender, it didn't fit the radii of the smaller fender very well so I printed an adapter to make it fit. I thought I liked it but every time I left it a while and came back I decided I didn't like it after all and tried to change it. I've printed so many of them in so many materials and designs it's embarrassing. I finally accepted it wasn't going to work and I may as well do the entire light. It will require sanding and painting but should work. I started out thinking I'd use an incandescent light because an LED would look out of place on the bike it's going on, then decided to use an LED panel I had for another light/bike. Here's a family shot of the changes that were made long the way. I forgot, this place doesn't let me hotlink photos from my website cuz it's not https... so the first pic is the family of tail lights. Second is the stl file (digital model basically) for the "final" version. Last pic is the earliest version sitting on the fender. This week's project is a chain guard. It's too long to print to fit the printer bed so it needs to be done in pieces. I'm on the third iteration now and as per usual, as soon as I start printing it I think of something I want to change. It's not 3;20 am here and the shim I printed to mimic the latest change I want to make just finished printing so the last piece that took two hours to print isn't for naught... no pictures of any of that stuff. It's still ugly. It will be a while before that one's done, each change so far has involved starting over from the beginning, not minor tweaks. Expand Brilliant. What to you paint/coat it with or will it be staying white? Link to comment Share on other sites More sharing options...
Clive Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 07:52, XTreme said: Not going above 7 here today! Expand The snow did not settle. 2 Link to comment Share on other sites More sharing options...
boboneleg Posted January 16, 2023 Share Posted January 16, 2023 On 15/01/2023 at 17:40, Sir Fallsalot said: Its my favorite laughing gif, i created it on giphy, i think you will have to copy and paste it to your PC and then copy and paste it when you want it unless Pete can do something with it here Expand Or you could just copy it like I just did .............. Link to comment Share on other sites More sharing options...
boboneleg Posted January 16, 2023 Share Posted January 16, 2023 Exciting day for me, I'm driving the mighty Cube up to Gatwick to meet my mate who is flying in with my donkey parts order 3 Link to comment Share on other sites More sharing options...
Slowlycatchymonkey Posted January 16, 2023 Share Posted January 16, 2023 Gonna get up to 18 degrees in Salobrena … which is brill when you’re a thousand miles away, it’s four degrees and you’re going to have to spend all day proof reading your stressy son’s uni work because he got massively distracted by some skirt and the deadlines are today and tomorrow Somehow (I don’t know exactly how) at some point this will all be my fault which of course I will do my best to weather but I guarantee there will be proper FaceTime rowing at some point. Kids the gift that keeps on giving. 3 Link to comment Share on other sites More sharing options...
Slowlycatchymonkey Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 10:44, boboneleg said: Exciting day for me, I'm driving the mighty Cube up to Gatwick to meet my mate who is flying in with my donkey parts order Expand Ooh that is cool. Link to comment Share on other sites More sharing options...
boboneleg Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 08:32, DesmoDog said: I do have a camera on it, but it's only to monitor what's going on. I have pretty much given up on doing timelapses since I never did anything with them anyway. That said here are a couple I did when it was set up to do it automatically - obviously I didn't optimize anything to make them look good. There are a ton of choices to make it look different, you can freeze the extruder so it looks like it's just moving straight up, or move it off to the side entirely, or let it move around, or a bunch of other crap. Some of them have an effect on the quality of the print so my default is now "off". Also the webcam I use sucks (doesn't handle anything less than ideal lighting very well, doesn't auto focus, etc) and the position of the camera isn't great this sort of thing. I guess the second one is recent, I updated some software and reset some defaults, but it's been turned off again already. http://teamyikes.com/Hardtail/06_Phil_A_Ment_20210115052430.mp4 http://teamyikes.com/Hardtail/Tail Light Housing v4.aw_20230107011406.mp4 Anywhos... last week I was working on tail lights. The light I wanted to use was made for a larger fender, it didn't fit the radii of the smaller fender very well so I printed an adapter to make it fit. I thought I liked it but every time I left it a while and came back I decided I didn't like it after all and tried to change it. I've printed so many of them in so many materials and designs it's embarrassing. I finally accepted it wasn't going to work and I may as well do the entire light. It will require sanding and painting but should work. I started out thinking I'd use an incandescent light because an LED would look out of place on the bike it's going on, then decided to use an LED panel I had for another light/bike. Here's a family shot of the changes that were made long the way. I forgot, this place doesn't let me hotlink photos from my website cuz it's not https... so the first pic is the family of tail lights. Second is the stl file (digital model basically) for the "final" version. Last pic is the earliest version sitting on the fender. This week's project is a chain guard. It's too long to print to fit the printer bed so it needs to be done in pieces. I'm on the third iteration now and as per usual, as soon as I start printing it I think of something I want to change. It's not 3;20 am here and the shim I printed to mimic the latest change I want to make just finished printing so the last piece that took two hours to print isn't for naught... no pictures of any of that stuff. It's still ugly. It will be a while before that one's done, each change so far has involved starting over from the beginning, not minor tweaks. Expand Very cool Link to comment Share on other sites More sharing options...
XTreme Posted January 16, 2023 Author Share Posted January 16, 2023 Just ordered this which will hopefully help with the cough. Cos i've found that once the dry air from the Pellet Burner gets to me then it kicks it off. Humidifier and Purifier 4 Link to comment Share on other sites More sharing options...
Slowlycatchymonkey Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 10:50, XTreme said: Just ordered this which will hopefully help with the cough. Cos i've found that once the dry air from the Pellet Burner gets to me then it kicks it off. Humidifier and Purifier Expand The particulates in solid fuels are a shocker for causing breathing problems. The purifiers we use at home do an incredible job bringing down the pollen count for my hayfever suffering son but they are a physical filter not an ioniser, ionisers I believe do small particles like tobacco smoke. Anyway sounds good, fingers crossed 1 Link to comment Share on other sites More sharing options...
XTreme Posted January 16, 2023 Author Share Posted January 16, 2023 On 16/01/2023 at 11:01, Marcel said: What you need Pete is a good doze of penasiline...trust me . Expand I've had antibiotics for my Laryngitis and Sinusitis! What I'm dealing with now is the fallout from the virus itself. 2 1 Link to comment Share on other sites More sharing options...
XTreme Posted January 16, 2023 Author Share Posted January 16, 2023 On 16/01/2023 at 11:15, Slowlycatchymonkey said: The particulates in solid fuels are a shocker for causing breathing problems. The purifiers we use at home do an incredible job bringing down the pollen count for my hayfever suffering son but they are a physical filter not an ioniser, ionisers I believe do small particles like tobacco smoke. Anyway sounds good, fingers crossed Expand Should be here Wednesday with any luck! 3 Link to comment Share on other sites More sharing options...
Slowlycatchymonkey Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 11:20, XTreme said: Should be here Wednesday with any luck! Expand You could do part of it the old fashioned way til then and stick a saucer of warm water on top of a heat source (radiator, boiler etc) and depending on what type of cough you have a drop or two of Oilbus Oil or other decongestant in the water can be pleasant. 2 Link to comment Share on other sites More sharing options...
yen_powell Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 11:25, Slowlycatchymonkey said: You could do part of it the old fashioned way til then and stick a saucer of warm water on top of a heat source (radiator, boiler etc) and depending on what type of cough you have a drop or two of Oilbus Oil or other decongestant in the water can be pleasant. Expand I used to hang plastic things on the radiators that held water. Always forgetting to top them up though. 2 Link to comment Share on other sites More sharing options...
skyrider Posted January 16, 2023 Share Posted January 16, 2023 On 16/01/2023 at 10:50, XTreme said: Just ordered this which will hopefully help with the cough. Cos i've found that once the dry air from the Pellet Burner gets to me then it kicks it off. Humidifier and Purifier Expand i have dehumidifiers in the sheds keeps everything nice and dry 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now