Pedro Posted November 26 Author Share Posted November 26 1 hour ago, Six30 said: ... no go check your bike for oil leaks. 6 Link to comment Share on other sites More sharing options...
Buckster Posted November 30 Share Posted November 30 Has it shit it's pants yet? Link to comment Share on other sites More sharing options...
Pedro Posted November 30 Author Share Posted November 30 2 hours ago, Buckster said: Has it shit it's pants yet? It doesn’t wear pants, it’s a motorcycle. And no, running nicely. 4 Link to comment Share on other sites More sharing options...
Pedro Posted December 6 Author Share Posted December 6 Valves checked today, after 900km. Will check again at 10000, and set the timing after the chains have stretched the initial bit. Also, replaced the gearbox output seal as the new seal wasn't sealing. Will have to go for a proper ride and see if it's sorted now, hope so otherwise my ride for late next week will also be compromised. 2 Link to comment Share on other sites More sharing options...
Sir Fallsalot Posted December 6 Share Posted December 6 Just now, Pedro said: Valves checked today, after 900km. Will check again at 10000, and set the timing after the chains have stretched the initial bit. Also, replaced the gearbox output seal as the new seal wasn't sealing. Will have to go for a proper ride and see if it's sorted now, hope so otherwise my ride for late next week will also be compromised. Good luck Pedro i don't know about you but i always have a bit of mistrust after i rebuild a bike, takes some time for me to be confident in it's reliability again especially now I've let my AA membership lapse LOL 1 Link to comment Share on other sites More sharing options...
Pedro Posted December 6 Author Share Posted December 6 Just now, Sir Fallsalot said: Good luck Pedro i don't know about you but i always have a bit of mistrust after i rebuild a bike, takes some time for me to be confident in it's reliability again especially now I've let my AA membership lapse LOL Hence it being looked over. It is running smoothly and very strong, so I am optimistic. 1 Link to comment Share on other sites More sharing options...
boboneleg Posted December 7 Share Posted December 7 Very slight wear on the cam but overall for that mileage it looks great Is kilometerage a word 2 Link to comment Share on other sites More sharing options...
Pedro Posted December 7 Author Share Posted December 7 6 hours ago, boboneleg said: Very slight wear on the cam but overall for that mileage it looks great Is kilometerage a word In Portuguese it would be quilometragem, so I suppose so. I looks ok for the use, it’s just that pesky output seal that might be sealing or not sealing, I’ll try and see tomorrow. 2 Link to comment Share on other sites More sharing options...
JustaPor Posted December 8 Share Posted December 8 19 hours ago, boboneleg said: Very slight wear on the cam but overall for that mileage it looks great Is kilometerage a word Kilométrage is the word in french. Since there are so many words in french that written the same way that in english and mean the same, I think that it's a valid word 2 Link to comment Share on other sites More sharing options...
Pedro Posted December 8 Author Share Posted December 8 Checked the breather hole for oil in the morning, and only doing slow roadsit looked a little moist but enough that it could be remains of the leak still exiting the rear of the arm. However, took a 20 or 30 mile fast cruise down a motorway to test it, and arrived home to this. only a small amount spread by wind, but I think it’s too much to be residual. Will try and get it fixed next week, second try. 1 1 Link to comment Share on other sites More sharing options...
Six30 Posted December 8 Share Posted December 8 2 hours ago, Pedro said: Checked the breather hole for oil in the morning, and only doing slow roadsit looked a little moist but enough that it could be remains of the leak still exiting the rear of the arm. However, took a 20 or 30 mile fast cruise down a motorway to test it, and arrived home to this. only a small amount spread by wind, but I think it’s too much to be residual. Will try and get it fixed next week, second try. 4 Link to comment Share on other sites More sharing options...
YamaHead Posted December 9 Share Posted December 9 22 hours ago, Six30 said: & I thought that was just standard equipment of a Triumph.... 5 Link to comment Share on other sites More sharing options...
Six30 Posted December 9 Share Posted December 9 1 hour ago, YamaHead said: & I thought that was just standard equipment of a Triumph.... Twat 4 Link to comment Share on other sites More sharing options...
Pedro Posted December 14 Author Share Posted December 14 If you care, bike’s back home, and turns out the leak wasn’t leaking anymore, it was just residual oil that was still inside the swinging arm. New seal was still put in now using the proper tool to have it aligned to spec, and we’re golden. I very much wish to go on a two day ride to Alentejo and maybe Algarve before Christmas, but still not sure I’ll be able to. 6 Link to comment Share on other sites More sharing options...
Pedro Posted Saturday at 23:18 Author Share Posted Saturday at 23:18 Been riding the GS, it's done a few miles now, mostly easy main roads. The little vent valve is off and the breather hole is open so that any remaining oil from inside the suspension arm can freely come out. The shaft is lubed inside, so I don't want to clean the inside of if with aggressive stuff like brake cleaner to not take lubrication and protection out of the shaft knuckles. So far, it's looking nice. I'll try and remember to fit the rubber breather valve in before it rains properly. 2 Link to comment Share on other sites More sharing options...
Buckster Posted 20 hours ago Share Posted 20 hours ago On 21/12/2024 at 23:18, Pedro said: The little vent valve is off and the breather hole is open so that any remaining oil from inside the suspension arm can freely come out. Also know as "it's pissing oil". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now